2009-2014 Acura TL SH-AWD 3.7L Used Engine
*Image for illustrative purposes only.

HYUNDAI SANTA FE ENGINE DIESEL, 2.2, D4HB, DOHC, TURBO, CM, 09/09-06/12

ï…Š

Large Network Of Engine Suppliers

ï…Š

Compare Quotes

ï…Š

Save Money

ï…Š

Save Time

Enquire Now

HYUNDAI SANTA FE ENGINE DIESEL, 2.2, D4HB, DOHC, TURBO, CM, 09/09-06/12 For Sale

It’s not hard to get an good second-hand Hyundai engine for sale at Used Engine Finder. In order to receive the best bargain on the best used engine for your requirements, we make it possible for you to reach out to a group of Hyundai engine importers & junk yards instantly.

Trying hard to find a motor is no longer necessary thanks to Used Engine Finder. We only require information about what you need, and our scrap yardswill respond with prices. And since we deal directly with them, you can be sure you’re obtaining the very best price.


So don’t waste anymore time and utilize Used Engine Finder to find the ideal engine for your Hyundai.

  • Save time and cash by using Used Engine Finder to get the ideal used motor.
  • Obtain numerous estimates from our trusted businesses.
  • The greatest prices may be obtained by dealing direct with engine sellers.
  • Locate engines for all makes and models of autos.
Best Engine Replacement Procedure
  1. Swap the engine’s oil, fuel and oil filters, and coolant.
  2. Install new engine and external coolers if existing.
  3. Cleanse the cooling system thoroughly, then replace the water pump.
  4. Renew necessary hoses and belts.
  5. Install a new timing belt, spark plugs, and wires.
  6. Replace essential gaskets and seals, focusing on the oil pan, front, and rear main seals.
  7. Clear the vehicle’s computer codes before engine installation.
  8. Ensure the replacement engine matches the original specifications.
  9. Transfer exhaust manifolds, mounts, distributor, and sensors from the old engine.
  10. Disable fuel and ignition before ignition to prime the oil.
  11. Ensure no plugs or tape remain on the engine before installation.
7 Common Mistakes to AVOID!
  1. Not resetting the vehicle’s computer codes before installation.
  2. Skipping the step of adding engine oil before the first startup.
  3. Forgetting to deactivate the fuel and ignition systems, essential for priming the oil.
  4. Ignoring the replacement of the oil cooler or the radiator’s integrated oil cooler.
  5. Overlooking the cleaning of the radiator and checking the operation of the cooling fans.
  6. Not swapping out the flywheel and its securing bolts.
  7. Trying to initiate the engine’s first run without proper priming.