*Image for illustrative purposes only.

JDM 3GR-FSE 2006-2011 Lexus GS300 Engine 3.0L V6 DOHC Wiring ECU

Large Network Of Engine Suppliers

Compare Quotes

Save Money

Save Time

JDM 3GR-FSE 2006-2011 Lexus GS300 Engine 3.0L V6 DOHC Wiring ECU For Sale

If you happen to be in the marketplace for locating a quality used Lexus engine for sale, look no further than Used Engine Finder. We will let you instantly contact a a network of Lexus salvage yards and engine importers, so that you can get the best bargain for the best used motor for your needs.

You needn’t spend time shopping around once you have Used Engine Finder at your disposal. Basically let us know what you’re looking for and our salvage yards will respond with numerous estimates. You can be positive you’re receiving the best price since we deal directly with them.

So don’t throw away any more time and make use of Used Engine Finder to find the best engine for your Lexus.

  • When looking for a better motor, save time and also money by utilizing Used Engine Finder.
  • Obtain quotes from several of our trusted engine suppliers.
  • By negotiating direct with engine companies, it is certain you’re obtaining the cheapest price possible.
  • You may find motors for any and all automobiles right here.
Best Engine Replacement Procedure
  1. Swap the engine’s oil, fuel and oil filters, and coolant.
  2. Install new engine and external coolers if existing.
  3. Cleanse the cooling system thoroughly, then replace the water pump.
  4. Renew necessary hoses and belts.
  5. Install a new timing belt, spark plugs, and wires.
  6. Replace essential gaskets and seals, focusing on the oil pan, front, and rear main seals.
  7. Clear the vehicle’s computer codes before engine installation.
  8. Ensure the replacement engine matches the original specifications.
  9. Transfer exhaust manifolds, mounts, distributor, and sensors from the old engine.
  10. Disable fuel and ignition before ignition to prime the oil.
  11. Ensure no plugs or tape remain on the engine before installation.
7 Common Mistakes to AVOID!
  1. Not resetting the vehicle’s computer codes before installation.
  2. Skipping the step of adding engine oil before the first startup.
  3. Forgetting to deactivate the fuel and ignition systems, essential for priming the oil.
  4. Ignoring the replacement of the oil cooler or the radiator’s integrated oil cooler.
  5. Overlooking the cleaning of the radiator and checking the operation of the cooling fans.
  6. Not swapping out the flywheel and its securing bolts.
  7. Trying to initiate the engine’s first run without proper priming.
Warranty Info
Review our Warranty, Return & Exchange policies before ordering. Standard Warranty: 30 days parts replacement. Extended Warranty: Optional 90 days. No labor costs covered. Defective parts may be replaced or refunded. Read more.