*Image for illustrative purposes only.

JDM Mazda BP Engine and 5 Speed Transmission 1994-1997 Mazda Miata MX5 1.8L 4

Large Network Of Engine Suppliers

Compare Quotes

Save Money

Save Time

JDM Mazda BP Engine and 5 Speed Transmission 1994-1997 Mazda Miata MX5 1.8L 4 For Sale

If you’re in the market for finding a good second-hand Mazda engine for sale, look no further than Used Engine Finder. We will allow you to immediately contact a a network of Mazda vehicle dismantlers and engine importers, so you can find a very good price on the ideal replacement engine for you.

With Used Engine Finder, there’s no need to lose time shopping around. We only require information about the engine you need, and our supplierswill respond with estimates. You can be assured you’re receiving the very best price since we deal directly with them.

So don’t throw away any more time and make use of Used Engine Finder to discover the best engine for your Mazda.

  • When looking for a better motor, save time as well as money by making use of Used Engine Finder.
  • Obtain deals from a number of our dependable engine shops.
  • The greatest deals may be acquired by working direct with engine suppliers.
  • Discover engines for all makes and models of cars.
Best Engine Replacement Procedure
  1. Swap the engine’s oil, fuel and oil filters, and coolant.
  2. Install new engine and external coolers if existing.
  3. Cleanse the cooling system thoroughly, then replace the water pump.
  4. Renew necessary hoses and belts.
  5. Install a new timing belt, spark plugs, and wires.
  6. Replace essential gaskets and seals, focusing on the oil pan, front, and rear main seals.
  7. Clear the vehicle’s computer codes before engine installation.
  8. Ensure the replacement engine matches the original specifications.
  9. Transfer exhaust manifolds, mounts, distributor, and sensors from the old engine.
  10. Disable fuel and ignition before ignition to prime the oil.
  11. Ensure no plugs or tape remain on the engine before installation.
7 Common Mistakes to AVOID!
  1. Not resetting the vehicle’s computer codes before installation.
  2. Skipping the step of adding engine oil before the first startup.
  3. Forgetting to deactivate the fuel and ignition systems, essential for priming the oil.
  4. Ignoring the replacement of the oil cooler or the radiator’s integrated oil cooler.
  5. Overlooking the cleaning of the radiator and checking the operation of the cooling fans.
  6. Not swapping out the flywheel and its securing bolts.
  7. Trying to initiate the engine’s first run without proper priming.