*Image for illustrative purposes only.

JDM MAZDA ENGINE KF-ZE 2.0L 24-VALVE 6 CYLINDER

ï…Š

Large Network Of Engine Suppliers

ï…Š

Compare Quotes

ï…Š

Save Money

ï…Š

Save Time

JDM MAZDA ENGINE KF-ZE 2.0L 24-VALVE 6 CYLINDER For Sale

Used Engine Finder is the greatest destination to locate a high-quality 2nd hand Mazda motor for sale. We allow you to promptly get in touch with a community of Mazda vehicle dismantlers and engine importers, so that you can find a very good bargain for the best 2nd hand motor for your requirements.

With Used Engine Finder, you needn’t lose time looking around. Basically tell us what you want and our engine suppliers will respond with several quotes. And since we deal directly with them, you can be sure you’re getting the best price.


So do not delay any more, discover your ideal engine today with Used Engine Finder.

  • When looking for a better motor, save time as well as money through the use of Used Engine Finder.
  • Obtain multiple estimates from our dependable traders.
  • Deal directly with engine shops, making certain you get the very best price.
  • Save Time With Making Just One Inquiry
Best Engine Replacement Procedure
  1. Swap the engine’s oil, fuel and oil filters, and coolant.
  2. Install new engine and external coolers if existing.
  3. Cleanse the cooling system thoroughly, then replace the water pump.
  4. Renew necessary hoses and belts.
  5. Install a new timing belt, spark plugs, and wires.
  6. Replace essential gaskets and seals, focusing on the oil pan, front, and rear main seals.
  7. Clear the vehicle’s computer codes before engine installation.
  8. Ensure the replacement engine matches the original specifications.
  9. Transfer exhaust manifolds, mounts, distributor, and sensors from the old engine.
  10. Disable fuel and ignition before ignition to prime the oil.
  11. Ensure no plugs or tape remain on the engine before installation.
7 Common Mistakes to AVOID!
  1. Not resetting the vehicle’s computer codes before installation.
  2. Skipping the step of adding engine oil before the first startup.
  3. Forgetting to deactivate the fuel and ignition systems, essential for priming the oil.
  4. Ignoring the replacement of the oil cooler or the radiator’s integrated oil cooler.
  5. Overlooking the cleaning of the radiator and checking the operation of the cooling fans.
  6. Not swapping out the flywheel and its securing bolts.
  7. Trying to initiate the engine’s first run without proper priming.
Warranty Info
Review our Warranty, Return & Exchange policies before ordering. Standard Warranty: 30 days parts replacement. Extended Warranty: Optional 90 days. No labor costs covered. Defective parts may be replaced or refunded. Read more.