*Image for illustrative purposes only.

JDM Toyota Caldina MR2 3SGTE 2.0L 5th Gen ST246 Engine Wire Ecu Turbo 3S Motor

Large Network Of Engine Suppliers

Compare Quotes

Save Money

Save Time

JDM Toyota Caldina MR2 3SGTE 2.0L 5th Gen ST246 Engine Wire Ecu Turbo 3S Motor For Sale

Used Engine Finder is the best place to discover a high-quality 2nd hand Toyota motor for sale. We allow you to speak to a database of Toyota dismantlers and engine importers without delay, to receive the greatest deal for the ideal substitute motor.

There’s no need to spend time looking around when you’ve got Used Engine Finder available. We only require information regarding what exactly you need, and our scrap yardswill respond with estimates. You can be sure you’re receiving the very best price since we work directly with them.

Look for your ideal Toyota engine using Used Engine Finder now!

  • When searching for a substitute motor, save time and also money by utilizing Used Engine Finder.
  • Get many quotes from our reliable sellers.
  • By negotiating directly with engine manufacturers, you can be certain you’re obtaining the best deal feasible.
  • Find engines for any and all vehicles, no matter model.
Best Engine Replacement Procedure
  1. Swap the engine’s oil, fuel and oil filters, and coolant.
  2. Install new engine and external coolers if existing.
  3. Cleanse the cooling system thoroughly, then replace the water pump.
  4. Renew necessary hoses and belts.
  5. Install a new timing belt, spark plugs, and wires.
  6. Replace essential gaskets and seals, focusing on the oil pan, front, and rear main seals.
  7. Clear the vehicle’s computer codes before engine installation.
  8. Ensure the replacement engine matches the original specifications.
  9. Transfer exhaust manifolds, mounts, distributor, and sensors from the old engine.
  10. Disable fuel and ignition before ignition to prime the oil.
  11. Ensure no plugs or tape remain on the engine before installation.
7 Common Mistakes to AVOID!
  1. Not resetting the vehicle’s computer codes before installation.
  2. Skipping the step of adding engine oil before the first startup.
  3. Forgetting to deactivate the fuel and ignition systems, essential for priming the oil.
  4. Ignoring the replacement of the oil cooler or the radiator’s integrated oil cooler.
  5. Overlooking the cleaning of the radiator and checking the operation of the cooling fans.
  6. Not swapping out the flywheel and its securing bolts.
  7. Trying to initiate the engine’s first run without proper priming.
Warranty Info
Review our Warranty, Return & Exchange policies before ordering. Standard Warranty: 30 days parts replacement. Extended Warranty: Optional 90 days. No labor costs covered. Defective parts may be replaced or refunded. Read more.