2009-2012 Acura RL 3.7L Used Engine
*Image for illustrative purposes only.

JDM TOYOTA SUPRA 1JZGTE ENGINE 5 SPEED MT TRANSMISSION W58 W55 1JZGTTE 1JZGT

ï…Š

Large Network Of Engine Suppliers

ï…Š

Compare Quotes

ï…Š

Save Money

ï…Š

Save Time

Enquire Now

JDM TOYOTA SUPRA 1JZGTE ENGINE 5 SPEED MT TRANSMISSION W58 W55 1JZGTTE 1JZGT For Sale

It is easy to get an good second-hand Toyota motor for sale at Used Engine Finder. We let you immediately get in touch with a community of Toyota autowreckers and engine importers, so you can get the best bargain for the best used engine for your requirements.

With Used Engine Finder, there’s no need to waste time searching. Simply inform us what you’re looking for and our salvage yards will respond with several prices. You can be positive you’re getting the very best price since we deal directly with them.


So don’t wait any more, find your ideal engine today along with Used Engine Finder.

  • Save time and cash by utilizing Used Engine Finder to get the best used engine.
  • Obtain quotes from several of our trustworthy engine sellers.
  • By negotiating directly with engine manufacturers, you can be sure you’re receiving the lowest price achievable.
  • You may find motors for just about any and all cars here.
Best Engine Replacement Procedure
  1. Swap the engine’s oil, fuel and oil filters, and coolant.
  2. Install new engine and external coolers if existing.
  3. Cleanse the cooling system thoroughly, then replace the water pump.
  4. Renew necessary hoses and belts.
  5. Install a new timing belt, spark plugs, and wires.
  6. Replace essential gaskets and seals, focusing on the oil pan, front, and rear main seals.
  7. Clear the vehicle’s computer codes before engine installation.
  8. Ensure the replacement engine matches the original specifications.
  9. Transfer exhaust manifolds, mounts, distributor, and sensors from the old engine.
  10. Disable fuel and ignition before ignition to prime the oil.
  11. Ensure no plugs or tape remain on the engine before installation.
7 Common Mistakes to AVOID!
  1. Not resetting the vehicle’s computer codes before installation.
  2. Skipping the step of adding engine oil before the first startup.
  3. Forgetting to deactivate the fuel and ignition systems, essential for priming the oil.
  4. Ignoring the replacement of the oil cooler or the radiator’s integrated oil cooler.
  5. Overlooking the cleaning of the radiator and checking the operation of the cooling fans.
  6. Not swapping out the flywheel and its securing bolts.
  7. Trying to initiate the engine’s first run without proper priming.