*Image for illustrative purposes only.

MERCEDES-BENZ ML W163 ENGINE MOTOR 2.7 CDI BARE 6120110201 (2001-2005)

Large Network Of Engine Suppliers

Compare Quotes

Save Money

Save Time

MERCEDES-BENZ ML W163 ENGINE MOTOR 2.7 CDI BARE 6120110201 (2001-2005) For Sale

It’s not hard to locate an excellent second-hand Mercedes engine for sale at Used Engine Finder. We will allow you to immediately contact a a community of Mercedes salvage yards and engine importers, so you can get the best price for the ideal 2nd hand engine for you.

Looking for an engine is no longer necessary thanks to Used Engine Finder. Just let us know what you’re looking for, and our suppliers get you numerous rates. It is certain you’re receiving the very best price since we work directly with them.


So don’t waste anymore time and use Used Engine Finder to discover the ideal engine for your Mercedes.

  • Save time and money by utilizing Used Engine Finder to get the best used engine.
  • Receive deals from a number of our reliable engine sellers.
  • By negotiating directly with engine companies, you can be sure you’re getting the lowest price achievable.
  • Find motors for any and all cars, irrespective of model.
Best Engine Replacement Procedure
  1. Swap the engine’s oil, fuel and oil filters, and coolant.
  2. Install new engine and external coolers if existing.
  3. Cleanse the cooling system thoroughly, then replace the water pump.
  4. Renew necessary hoses and belts.
  5. Install a new timing belt, spark plugs, and wires.
  6. Replace essential gaskets and seals, focusing on the oil pan, front, and rear main seals.
  7. Clear the vehicle’s computer codes before engine installation.
  8. Ensure the replacement engine matches the original specifications.
  9. Transfer exhaust manifolds, mounts, distributor, and sensors from the old engine.
  10. Disable fuel and ignition before ignition to prime the oil.
  11. Ensure no plugs or tape remain on the engine before installation.
7 Common Mistakes to AVOID!
  1. Not resetting the vehicle’s computer codes before installation.
  2. Skipping the step of adding engine oil before the first startup.
  3. Forgetting to deactivate the fuel and ignition systems, essential for priming the oil.
  4. Ignoring the replacement of the oil cooler or the radiator’s integrated oil cooler.
  5. Overlooking the cleaning of the radiator and checking the operation of the cooling fans.
  6. Not swapping out the flywheel and its securing bolts.
  7. Trying to initiate the engine’s first run without proper priming.
Warranty Info
Review our Warranty, Return & Exchange policies before ordering. Standard Warranty: 30 days parts replacement. Extended Warranty: Optional 90 days. No labor costs covered. Defective parts may be replaced or refunded. Read more.