*Image for illustrative purposes only.

MITSUBISHI OUTLANDER 2.3 DIESEL ENGINE 4N14 2011 LOW MILEAGE STARTED AND TESTED

Large Network Of Engine Suppliers

Compare Quotes

Save Money

Save Time

MITSUBISHI OUTLANDER 2.3 DIESEL ENGINE 4N14 2011 LOW MILEAGE STARTED AND TESTED For Sale

It is easy to obtain an good second hand Mitsubishi engine for sale at Used Engine Finder. We allow you to promptly get in touch with a network of Mitsubishi junkyards and engine importers, so you can find the best bargain for the best 2nd hand engine to suit your needs.

Searching hard for an engine is not necessary merit to Used Engine Finder. We just require details about what you need, and our salvage yardswill respond with quotations. You can be assured you’re receiving the very best price since we work directly with them.


So don’t squander anymore time and utilize Used Engine Finder to find the ideal engine for your Mitsubishi.

  • Used Engine Finder may help you save time and money by locating the optimal engine for your Mitsubishi.
  • Get deals from numerous of our honest engine sellers.
  • By negotiating direct with engine manufacturers, it is certain you’re receiving the lowest price possible.
  • Save Time With Making Just One Inquiry
Best Engine Replacement Procedure
  1. Swap the engine’s oil, fuel and oil filters, and coolant.
  2. Install new engine and external coolers if existing.
  3. Cleanse the cooling system thoroughly, then replace the water pump.
  4. Renew necessary hoses and belts.
  5. Install a new timing belt, spark plugs, and wires.
  6. Replace essential gaskets and seals, focusing on the oil pan, front, and rear main seals.
  7. Clear the vehicle’s computer codes before engine installation.
  8. Ensure the replacement engine matches the original specifications.
  9. Transfer exhaust manifolds, mounts, distributor, and sensors from the old engine.
  10. Disable fuel and ignition before ignition to prime the oil.
  11. Ensure no plugs or tape remain on the engine before installation.
7 Common Mistakes to AVOID!
  1. Not resetting the vehicle’s computer codes before installation.
  2. Skipping the step of adding engine oil before the first startup.
  3. Forgetting to deactivate the fuel and ignition systems, essential for priming the oil.
  4. Ignoring the replacement of the oil cooler or the radiator’s integrated oil cooler.
  5. Overlooking the cleaning of the radiator and checking the operation of the cooling fans.
  6. Not swapping out the flywheel and its securing bolts.
  7. Trying to initiate the engine’s first run without proper priming.
Warranty Info
Review our Warranty, Return & Exchange policies before ordering. Standard Warranty: 30 days parts replacement. Extended Warranty: Optional 90 days. No labor costs covered. Defective parts may be replaced or refunded. Read more.