*Image for illustrative purposes only.

Motor Fiat 500C 0.9 Twinair 312A2000 – 86 HP 2012 Yr 97.862 Km

Large Network Of Engine Suppliers

Compare Quotes

Save Money

Save Time

Motor Fiat 500C 0.9 Twinair 312A2000 – 86 HP 2012 Yr 97.862 Km For Sale

If you’re in the marketplace for locating a quality second hand Fiat engine for sale, take a look at Used Engine Finder. We let you immediately get in touch with a community of Fiat autowreckers and engine importers, so you can find the best bargain on the best 2nd hand engine to suit your needs.

Searching hard for a motor is not necessary thanks to Used Engine Finder. Just let us know what you’re trying to find, and our shops get you numerous rates. Our direct relationship with the dealer helps to ensure that we can offer you the perfect pricing.


So don’t waste any more time and make use of Used Engine Finder to discover the ideal engine for your Fiat.

  • Save time and money by utilizing Used Engine Finder to find the best replacement motor.
  • Receive deals from a number of our honest engine sellers.
  • Deal directly with engine suppliers, ensuring you receive the very best price.
  • You may find motors for just about any and all cars here.
Best Engine Replacement Procedure
  1. Swap the engine’s oil, fuel and oil filters, and coolant.
  2. Install new engine and external coolers if existing.
  3. Cleanse the cooling system thoroughly, then replace the water pump.
  4. Renew necessary hoses and belts.
  5. Install a new timing belt, spark plugs, and wires.
  6. Replace essential gaskets and seals, focusing on the oil pan, front, and rear main seals.
  7. Clear the vehicle’s computer codes before engine installation.
  8. Ensure the replacement engine matches the original specifications.
  9. Transfer exhaust manifolds, mounts, distributor, and sensors from the old engine.
  10. Disable fuel and ignition before ignition to prime the oil.
  11. Ensure no plugs or tape remain on the engine before installation.
7 Common Mistakes to AVOID!
  1. Not resetting the vehicle’s computer codes before installation.
  2. Skipping the step of adding engine oil before the first startup.
  3. Forgetting to deactivate the fuel and ignition systems, essential for priming the oil.
  4. Ignoring the replacement of the oil cooler or the radiator’s integrated oil cooler.
  5. Overlooking the cleaning of the radiator and checking the operation of the cooling fans.
  6. Not swapping out the flywheel and its securing bolts.
  7. Trying to initiate the engine’s first run without proper priming.