2014-2015 Acura ILX 2.0L Used Engine
*Image for illustrative purposes only.

Pontiac Fiero GT 2.8L V6 Engine/Motor Assembly Video Tested 151k OEM

ï…Š

Large Network Of Engine Suppliers

ï…Š

Compare Quotes

ï…Š

Save Money

ï…Š

Save Time

Enquire Now

Pontiac Fiero GT 2.8L V6 Engine/Motor Assembly Video Tested 151k OEM For Sale

Used Engine Finder is the better destination to find a high-quality used Pontiac motor for sale. We will allow you to instantaneously contact a a community of Pontiac autowreckers and engine importers, so that you can get the best price on the ideal replacement engine to meet your needs.

With Used Engine Finder, you needn’t spend time shopping around. We just require information about the engine you need, and our sellerswill respond with quotes. And because we deal directly with them, you can be certain you’re receiving the best price.


Look for your ideal Pontiac engine using Used Engine Finder today!

  • When searching for an alternative engine, save time and money by utilizing Used Engine Finder.
  • Get several quotes from our honest suppliers.
  • By negotiating directly with engine companies, it is certain you’re receiving the best deal feasible.
  • Find motors for any and all vehicles, regardless of model.
Best Engine Replacement Procedure
  1. Swap the engine’s oil, fuel and oil filters, and coolant.
  2. Install new engine and external coolers if existing.
  3. Cleanse the cooling system thoroughly, then replace the water pump.
  4. Renew necessary hoses and belts.
  5. Install a new timing belt, spark plugs, and wires.
  6. Replace essential gaskets and seals, focusing on the oil pan, front, and rear main seals.
  7. Clear the vehicle’s computer codes before engine installation.
  8. Ensure the replacement engine matches the original specifications.
  9. Transfer exhaust manifolds, mounts, distributor, and sensors from the old engine.
  10. Disable fuel and ignition before ignition to prime the oil.
  11. Ensure no plugs or tape remain on the engine before installation.
7 Common Mistakes to AVOID!
  1. Not resetting the vehicle’s computer codes before installation.
  2. Skipping the step of adding engine oil before the first startup.
  3. Forgetting to deactivate the fuel and ignition systems, essential for priming the oil.
  4. Ignoring the replacement of the oil cooler or the radiator’s integrated oil cooler.
  5. Overlooking the cleaning of the radiator and checking the operation of the cooling fans.
  6. Not swapping out the flywheel and its securing bolts.
  7. Trying to initiate the engine’s first run without proper priming.