*Image for illustrative purposes only.

VW Golf mk5 GTI 2.0 TFSI 2004-2009 AXX Engine bottom end complete block

Large Network Of Engine Suppliers

Compare Quotes

Save Money

Save Time

VW Golf mk5 GTI 2.0 TFSI 2004-2009 AXX Engine bottom end complete block For Sale

Used Engine Finder is the better place to discover a high-quality used VW engine for sale. In order to get the best price on the best used motor for your requirements, we make it easy for you to reach a community of VW engine importers & junk yards quickly.

Trying hard to find a motor is no longer necessary thanks to Used Engine Finder. Just let us know what you’re looking for, and our traders get you numerous costs. And because we deal directly with them, you can be sure you’re receiving the best price.

So don’t hold out any more, find your perfect engine right now together with Used Engine Finder.

  • Save time and cash by utilizing Used Engine Finder to get the perfect replacement motor.
  • Obtain multiple quotes from our trusted businesses.
  • By negotiating direct with engine manufacturers, you can be sure you’re obtaining the cheapest price achievable.
  • You may find motors for any and all cars right here.
Best Engine Replacement Procedure
  1. Swap the engine’s oil, fuel and oil filters, and coolant.
  2. Install new engine and external coolers if existing.
  3. Cleanse the cooling system thoroughly, then replace the water pump.
  4. Renew necessary hoses and belts.
  5. Install a new timing belt, spark plugs, and wires.
  6. Replace essential gaskets and seals, focusing on the oil pan, front, and rear main seals.
  7. Clear the vehicle’s computer codes before engine installation.
  8. Ensure the replacement engine matches the original specifications.
  9. Transfer exhaust manifolds, mounts, distributor, and sensors from the old engine.
  10. Disable fuel and ignition before ignition to prime the oil.
  11. Ensure no plugs or tape remain on the engine before installation.
7 Common Mistakes to AVOID!
  1. Not resetting the vehicle’s computer codes before installation.
  2. Skipping the step of adding engine oil before the first startup.
  3. Forgetting to deactivate the fuel and ignition systems, essential for priming the oil.
  4. Ignoring the replacement of the oil cooler or the radiator’s integrated oil cooler.
  5. Overlooking the cleaning of the radiator and checking the operation of the cooling fans.
  6. Not swapping out the flywheel and its securing bolts.
  7. Trying to initiate the engine’s first run without proper priming.